Armory Wallet: Detailed Review and Full Guide on How to Use It

Sent bitcoins before realizing i need Bitcoin Core

Hello, let me begin by saying im a newbie with no substantial knowledge about chains and coins and what have you.
To avoid fees and stuff I thought it would be a good idea to create a wallet using Armory. It all seemed pretty straight forward so I just created a receiving address after creating my wallet and sent bitcoins from to my armory wallet.
Immediately after submitting my transaction I realized how ignorant I was, turns out I need Bitcoin Core to get Armory to work online, and I would really prefer not to download the whole chain thing as it will probably take me several days... So I have a couple of questions:
  1. Did I just shit the bed and lose all the bitcoins that I transfered?
  2. Is there a way to export my wallet and addresses from Armory(offline) to Electrum to avoid downloading the whole chain with Bitcoin Core?
submitted by kjaeft to BitcoinBeginners [link] [comments]

A Guide to Keeping Keys Offline Using Armory +rPi

Hi Redditors.
I am going to post in this thread my experiences in getting my Desktop (Debian) machine running Armory in watch-only mode, and coupling that with an offline Raspberry Pi (which holds my private keys) for signing the transactions previously made in watch-only mode.
I actually compiled Armory from source directly on my Pi. This guide is probably more for the bitcoin 'power user', as to run Armory online, and broadcast the signed transactions, you need to have a bitcoin full node running (bitcoind).
Basic requirements:
Aimed-for Setup:
I'll post the guide in digestible sections...

Section 1

I should begin by saying I installed source code from git, and got Armory to build the DB on my desktop initially, WITHOUT creating a wallet.. (This allowed me to debug what was going on a little!)
Go to, select Armory..
It leads to a Download from Git:
Followed the procedure for Linux Debian verify code, compile, install, all straight-forward..
Began by running bitcoind, and telling Armory where to find it. This is the command I used, obviously it was all on one line and didn't include the arrows/explanations!:
python \ --satoshi-datadir=/BlockChain/chain20180414/blocks \ # <-----(where my bitcoind blocks live) --datadir=/ArmoryDataDi \ # <-----(this is instead of ~/.armory) --dbdir=/ArmoryDataDidatabases # <-------(again, non std. place used for Armory's databases.. my choice.) 
So, on the Desktop, after the initial "build databases"
(NB the initial "Build Databases" took about 1.5h and my two CPUs were maxed the whole time, Temps up to 62C. Not ideal; Im not in a rush!)
I then wanted to import a watch-only wallet.
Before I did this, I took a full backup of the Armory data dir:
(or ~/.armory in a default installation).
I'd hate to have to make Armory do another full sync with the bitcoind node!

Section 2

Next step: offline wallet (with Private Keys) is on a Raspberry Pi.
I downloaded the source and managed to compile it on the pi itself! :)
Though there were some gymnastics needed to setup the Pi.
My Pi is running Raspbian based on Wheezy.. quite old!
I did the following on the Pi:
apt-get update apt-get upgrade (<---took about an hour!) apt-get install autotools-dev apt-get install autoconf 
Then I followed the instructions exactly as I had done for my Debian Desktop machine, EXCEPT:
I had to increase the Pi's swap space. I upped it from 100Mb to 400Mb.
The compilation took 7 hours, and my poor SD card got a thrashing.
But after compilation, I put the Swap back to 100Mb and Armory runs ok with about 150Mb of memory (no swap needed).
Swap increase on the Pi:
use your favourite editor, and open the file /etc/dphys-swapfile
add/change the following line:
Then, REBOOT the Pi:
sudo shutdown -h -P now 
Once the compilation was done on the Pi, put the swap back, rebooted and created an Armory wallet.
I added manual entropy and upped the encryption 'time' from 250ms to 2500ms - since the Pi is slow, but I'll be happy to wait for more iterations in the Key Derivation Function.
Once the wallet was created, it obviously prompts you for backup.
I want to add a private key of my own (i.e. import), so don't do the backup until this is over.
I import my Private Key, and Armory checks that this corresponds to a Public Key, which I check is correct.
This is the point now where the Pi storage medium (e.g an SD card) has to be properly destroyed if you ever get rid of it.
I had thought that now would be a good time to decide if your new wallet will generate Segwit receiving addresses, and also addresses used to receive 'change' after a transaction..
But it seems Armory WON'T let you switch to P2SH-P2WPKH unless your Armory is connected to a node offering "WITNESS" service.
Obviously, my Pi is offline and will never connect to a node, so the following will not work on the Pi:
NB: I thought about setting this on the Debian "watch-only" wallet, but that would surely mean doom, as the Pi would not know about those addresses and backups might not keep them.. who knows...
So, end result:- no segwit for me just yet in my offline funds.

--If anyone can offer a solution to this, I'd be very grateful--

Section 3

Ok, now this is a good point to back up your wallet on the Pi. It has your imported keys. I choose a Digital Backup - and put it on a USB key, which will never touch the internet and will be stored off-site. I also chose to encrypt it, because I'm good with passwords..
NB: The Armory paper backup will NOT back up your imported private keys, so keep those somewhere if you're not sweeping them. It would be prudent to have an Armory paper backup anyway, but remember it will likely NOT help you with that imported key.
Now for the watch-only copy of the wallet. I want to get the "watch-only" version onto my Desktop Debian machine.
On the Pi, I created (exported to a USB key) a "watching-only" copy of my wallet.
I would use the RECOMMENDED approach, export the "Entire Wallet File".
As you will see below, I initially exported only the ROOT data, which will NOT capture the watching-only part of the Private Key I entered manually above (i.e. the public Key!).
Now, back on the Debian Desktop machine...
I stopped all my crontab jobs; just give Armory uninterrupted CPU/memory/disk...
I also stopped bitcoind and made a backup prior to any watch-only wallet being imported.
I already made a backup of Armory on my Desktop, before any wallet import.
(this was needed, as I made a mistake.. see below)
So on the Debian Desktop machine, I begin by firing up bitcoind.
my command for this is:
./bitcoind -daemon -datadir=/BlockChain/chain20180414 -dbcache=400 -maxmempool=400 

Section 4

I try running Armory like this:
(I'm actually starting Armory from a script -
Inside the script, it has the line:
python --ram-usage=4 --satoshi-datadir=/BlockChain/chain20180414/blocks --datadir=/ArmoryDataDi --dbdir=/ArmoryDataDidatabases 
I know from bitter experience that doing a scan over the blockchain for a new wallet takes a looong time and a lot of CPU, and I'd like it to play nicely; not gobble all the memory and swap and run my 2xCPUs both at 100% for four hours...
So... I aim to run with --ram-usage=X and --thread-count=X
(For me in the end, X=1 but I began with X=4)
I began with --ram-usage=4 (<--- = 4x128Mb)
The result is below...
TypeError: cannot concatenate 'str' and 'int' objects 
It didn't recognise the ram-usage and carried on, crippling my Debian desktop PC.
This is where it gets dangerous; Armory can gobble so much memory and CPU that the windowing environment can cease up, and it can take over 30 minutes just to exit nicely from bitcoind and ArmoryDB.
So, I ssh to the machine from another computer, and keep an eye on it with the command
"free -h" 
I'd also be able to do a "sudo reboot now" if needed from here.

Section 5

So, trying to get my --ram-usage command recognised, I tried this line (added quotes):
python --ram-usage="4" --satoshi-datadir=/BlockChain/chain20180414/blocks --datadir=/ArmoryDataDi --dbdir=/ArmoryDataDidatabases 
But no, same error...
Loading Armory Engine: Armory Version: 0.96.4 Armory Build: None PyBtcWallet Version: 1.35 Detected Operating system: Linux OS Variant : ('debian', '9.4', '') User home-directory : /home/ Satoshi BTC directory : /BlockChain/chain20180414 Armory home dir : /ArmoryDataDi ArmoryDB directory : /ArmoryDataDidatabases Armory settings file : /ArmoryDataDiArmorySettings.txt Armory log file : /ArmoryDataDiarmorylog.txt Do wallet checking : True (ERROR) - Unsupported language specified. Defaulting to English (en) (ERROR) - Failed to start Armory database: cannot concatenate 'str' and 'int' objects Traceback (most recent call last): File "", line 1808, in startArmoryDBIfNecessary TheSDM.spawnDB(str(ARMORY_HOME_DIR), TheBDM.armoryDBDir) File "/BitcoinArmory/", line 387, in spawnDB pargs.append('--ram-usage=' + ARMORY_RAM_USAGE) TypeError: cannot concatenate 'str' and 'int' objects 

Section 6

So, I edit the Armory python file
if ARMORY_RAM_USAGE != -1: pargs.append('--ram-usage=4') #COMMENTED THIS, SO I CAN HARDCODE =4 # ' + ARMORY_RAM_USAGE) 
Running it, I now have acknowledgement of the --ram-usage=4:
(WARNING) - Spawning DB with command: /BitcoinArmory/ArmoryDB --db-type="DB_FULL" --cookie --satoshi-datadir="/BlockChain/chain20180414/blocks" --datadir="/ArmoryDataDi" --dbdir="/ArmoryDataDidatabases" --ram-usage=4 
Also, even with ram-usage=4, it used too much memory, so I told it to quit.
It took over 30 minutes to stop semi-nicely. The last thing it reported was:
ERROR - 00:25:21: (StringSockets.cpp:351) FcgiSocket::writeAndRead FcgiError: unexpected fcgi header version 
But that didn't seem to matter or corrupt the Armory Database, so I think it's ok.
So, I get brave and change as below, and I make sure my script has a command line for --ram-usage="ABCDE" and --thread-count="FGHIJ"; the logic being that these strings "ABCDE" will pass the IF criteria below, and my hardcoded values will be used...
if ARMORY_RAM_USAGE != -1: pargs.append('--ram-usage=1') #COMMENTED THIS, SO I CAN HARDCODE =1 # ' + ARMORY_RAM_USAGE) if ARMORY_THREAD_COUNT != -1 pargs.append('--thread-count=1') #COMMENTED THIS, SO I CAN HARDCODE =1 #' + ARMORY_THREAD_COUNT) 
So, as usual, I use my script and start this with: ./
(which uses command line:)
python --ram-usage="ABCDE" --thread-count="FGHIJ" --satoshi-datadir=/BlockChain/chain20180414/blocks --datadir=/ArmoryDataDi --dbdir=/ArmoryDataDidatabases 
(this forces it to use my hard-coded values in
So, this is the command which it reports that it starts with:
(WARNING) - Spawning DB with command: /BitcoinArmory/ArmoryDB --db-type="DB_FULL" --cookie --satoshi-datadir="/BlockChain/chain20180414/blocks" --datadir="/ArmoryDataDi" --dbdir="/ArmoryDataDidatabases" --ram-usage=1 --thread-count=1 
Again, this is where it gets dangerous; Armory can gobble so much memory and CPU that the windowing environment can cease up. So I ssh to the machine and keep an eye on it with:
"free -h" 

Section 7

So, on the Debian Desktop PC, I inserted the USB stick with the watch-only wallet I exported from the Pi.
Start Armory...
Import "Entire Wallet File" watch-only copy.
Wait 4 hours..
After running Armory for about 30m, the memory usage dropped by 400m... wierd...
It took ~2 hours to get 40% completion.
After 3.5 hours it's almost there...
The memory went up to about 1.7Gb in use and 900Mb of Swap, but the machine remained fairly responsive throughout, apart from a few (10?) periods at the start, where it appeared to freeze for 10-30s at a time.
(That's where my ssh session came in handy - I could check the machine was still ok with a "free -h" command)
Now, I can:
Create an unsigned transaction on my Desktop,
Save the tx to USB stick,
Move to the Pi,
Sign the tx,
Move back to the Desktop,
Broadcast the signed tx.

Section 8

My initial Mistake:
This caused me to have to roll-back my Armory database, using the backup. so you should try to avoid doing this..
On the Pi, I exported only the ROOT data, which will NOT capture the watching-only part of the Private Key
It is RECOMMENDED to use the Digital Export of Entire Wallet File from the Pi when making a watch-only copy. If you just export just the "ROOT data", not the "Entire Wallet File", you'll have problems if you used an imported Private Key in the offline wallet, like I did.
Using the ROOT data text import, after it finished... my balance was zero. So,. I tried a Help->Rescan Balance (Restart Armory, takes 1minute to get back up and running) No Luck. Still zero balance.
So, I try Rescan Databases.. This will take longer. Nah.. no luck.
So, I tried again, thinking it might be to do with the fact that I imported the text "root data" stuff, instead of following the (Recommended) export of watching-wallet file.
So, I used my Armory backup, and wound back the ArmoryDataDi to the point before the install of the (zero balance) wallet. (you should not need to do this, as you will hopefully use the RECOMMENDED approach of exporting the "Entire Wallet File"!)
submitted by fartinator to Bitcoin [link] [comments]

Generate and Recover Funds Using Secret Key From Litecoin Paper Wallet Sweeping Importing How To Withdraw Bitcoin From CryptoTab in Blockchain Wallet Explain In Urdu How to sync Bitcoin wallet on multiple devices - BlockChain Wiederherstellungspasswort für Wallet bei einrichten

A Bitcoin wallet is a collection of private keys but may also refer to client software used to manage those keys and to make transactions on the Bitcoin network. Alternative 2020 Article 6 Hack Proof Hardware Bitcoin Wallet With PIN And Encryption Password ↓ 01 – BitCoin Core Windows macOS Linux Ubuntu. Bitcoin Core is programmed to decide which block chain contains valid ... Digital money that’s instant, private, and free from bank fees. Download our official wallet app and start using Bitcoin today. Read news, start mining, and buy BTC or BCH. The Root Key is all you need to send bitcoin from that wallet without using Armory, see Armory Root Key -> Addresses and Private Keys. Version 1.35c - SecurePrint. The only way I know about at present is to install and run Armory on an OFFLINE PC and use the Armory wallet recovery. See Offline PC setup below. I will update if I find another way. Double-click the wallet, at Wallet Properties, click Export Watch-Only Wallet and save it to a thumbdrive. 6. Take the thumbdrive to your online computer. Install bitcoin-core from Armory. Starting Armory in online mode may take many hours. It may take a day for syncing and building its own internal database. Once it is online, click Restore or Import Wallet from the watching-only wallet you ... Download the Bitcoin Wallet by A simple, secure way to send and receive Bitcoin. Available for iOS, Android, Mac, Windows, and Linux. Supports Bitcoin Cash (BCH) and Bitcoin (BTC).

[index] [8478] [43314] [7454] [5663] [3910] [4216] [47530] [49790] [19967] [50186]

Generate and Recover Funds Using Secret Key From Litecoin Paper Wallet

Get your private keys from the Android Bitcoin Wallet with OpenSSL - Duration: 11:13. Bitcoin ... How to export private key on - Duration: 6:22. Blank Verse 41,704 views. 6:22 ... Guide how to set up Bitcoin wallet on multiple devices. Multiple devices sync with one Bitcoin wallet. Bitcoin wallet - BlockChain Device: HP - PC and Android - Sony Xperia Tablet S Music: The ... BLOCKCHAIN WALLET EINRICHTEN ... Exodus Wallet: How to View and Export Private Keys - Duration: 3:27. LetsDoCrypto 4,093 views. 3:27 . How To Fund Your Blockchain Wallet With Bitcoin - Duration: 7 ... Is It Safe to Install a Desktop Bitcoin Wallet? - (How to install your first bitcoin wallet) Crypto ... Off Chain with Jimmy Song 19,215 views. 11:06 . Bitcoin Core - Duration: 3:14. Armory 46,637 ... How To Export & Import Private Keys (Litecoin/Bitcoin) ... Sweeping a Bitcoin Paper Wallet with Mycelium Phone Wallet app - Duration: 2:38. Dash Infonode 33,226 views. 2:38. Bitcoin Paper Wallet ...